|
|
Water, sewage and other homogeneous fluids in full pipe flow |
|
¡À1.0. |
Flow velocity adaptable, m/s
|
¡À0.01-¡À12. |
|
DN80-DN2000. |
|
1Cr18Ni9Ti (Stainless steel) |
Maximum pressure-bearing capacity of transducer
|
Max. pressure at local places in pipe: <2MPa Immersion depth of transducer<3 m |
Working Environment |
Conversion unit |
Temperature: -10¡æ~+45¡æ Humidity: 85% (RH) (For use under otherwise specific conditions, please specify on ordering). |
Transducer |
Normal temperature type: 4~50¡æ High temperature type: 4~130¡æ. |
Cable |
-40¡æ - +70¡æ. |
Output of conversion unit |
Analog signal |
Optical-isolated: 4~20mA/0~20mA/0~10mA (Selectable via keyboard), Load capacity: <600¦¸ |
Switching signal |
Cumulative flow electronic switching output Closing time: 3 ms Cycle: 6ms Transmission distance: <500 m. |
Serial port |
RS-485 Transmission rate: 4800 bit/s Transmission distance: <1200 m |
Printer |
RS-485 is needed for its working Thermal sensitive mini-printer (Optional) |
Keyboard |
1X3 pushbuttons. |
Display Mode |
2X16 digit back-lit liquid crystal character display |
Data display |
Simultaneous display of:
Instantaneous flowrate: -99999.99~+99999.99 m3/h
Cumulative flowrate: -19999999.99~+19999999.99 m3Key display of cumulative running time |
Data storage |
Cumulative flowrate, cumulative running time and various set parameters (Data can be saved for 100 years after power fail) |
Power supply |
AC220V¡À15% Power:<10W 50Hz or DC5¡«36V, 1A( Please specify on
ordering) |
Protection class |
Transducer: |
Conversion unit |
IP68 |
Non-integral/Integral type: IP65 Panel-mounted type: IP51 |
Class of explosion resistance of explosion-proof transducer |
ExibIIBT6 |
Transducer cable length (Cabling distance) |
10m¡¢20m¡¢30m......300m. |
