Meter |
SCL-611 Single-path Industrial Version |
SCL-612 (4) 2 / 4-Path Industrial Version |
Fluid measured |
Water, sewage and other homogeneous fluids in full pipe flow |
Accuracy, % |
±1.0 |
±0.5 |
Pipe size adaptable, mm |
DN15-DN250 |
2-path version: DN100~DN250
|
4-path version: DN200~DN250 |
|
Maximum pressure-bearing capacity of measuring pipe section, MPa |
1.6MPa |
Working Environment |
Conversion unit |
Temperature: -10℃~+45℃, Humidity: ≤85% (RH) (For use under otherwise conditions, please specify on ordering). |
Transducer |
Normal-temperature type: 4~50℃, High-temperature type: 4~100℃. |
Cable |
-40℃~+65℃ |
Output signal |
4~20mA (External power source needed),Passive cumulative pulse (cycle: 12 ms, width: 6ms, 1 pulse = 0.1m3),RS485,GSM meter readings radio transmission. |
Keyboard |
Magnetic induction or manual keys |
Display |
LCD 8-digit + Prompting character Word height: 8.5mm |
Screen display |
Instantaneous flowrate, m3/h Cumulative flowrate, m3 Date: Y/M/D Clock: H/M/S |
Data storage |
Storage of cumulative flowrate and cumulative effective running time in EEPROM (Data can be saved for 100 years after power fail) |
Power supply |
Powered by either battery（capable of sustaining a continuous meter operation for over 6 years）or a two-wire system (DC24V,4~20mA) or DC24V,4~20mA with battery stand-by |
Protection class |
Integral version: IP68
Conversion unit of non-integral version: IP68
Display of non-integral version: IP65 |
Power consumption |
＜0.8mW |
The standard length of the cable connecting the conversion unit of a non-integral version with the display: 6m (For a cable length other than this, please specify on ordering). |
