| |
Fluid measured |
Water, sewage and other homogeneous fluids in full pipe flow |
Accuracy, % |
¡À1.0. |
Flow velocity adaptable, m/s |
¡À0.01¡«¡À12 |
Pipe size adaptable, mm |
DN300¡«DN600 |
Transducer material |
Steel or stainless steel |
Maximum pressure-bearing capacity of transducer |
DN300~DN600: <1.6MPa
Immersion depth of transducer: <3 m |
Working
Environment |
Conversion unit |
Temperature: -10¡æ~+45¡æ Humidity: ¡Ü85% (RH) (For use under otherwise specific conditions, please specify on ordering). |
Transducer |
Normal temperature type: 4~50¡æ High temperature type: 4~130¡æ. |
Cable |
-40¡æ ¡« +70¡æ |
Output of conversion unit |
Analog signal |
Optical-isolated: 4~20mA/0~20mA/0~10mA (Selectable via keyboard), Load capacity: <600¦¸ |
Switching signal |
Cumulative flow electronic switching output Closing time: 3 ms
Cycle: 6 ms
Transmission distance: ¡Ü500 m. |
Serial port |
RS-485 Transmission rate: 4800 bit/s Transmission distance: ¡Ü1200 m |
Printer |
RS-485 is needed for its working Thermal sensitive mini-printer (Optional) |
Keyboard |
1¡Á3 pushbuttons |
Display Mode |
2X16 digit back-lit liquid crystal character display |
Data display |
Simultaneous display of:
Instantaneous flowrate: -99999.99~+99999.99 m3/h
Cumulative flowrate: -19999999.99~+19999999.99 m3
Key display of cumulative running time |
Data storage |
Cumulative flowrate, cumulative running time and various set parameters (Data can be saved for 100 years after power fail) |
Power supply |
AC220V¡À15%,50Hz Power<10W (DC5~36V, 1A. Please specify on ordering) |
Protection class |
Transducer: |
Conversion unit: |
IP68 |
Non-integral/Integral type: IP65 Panel-mounted type: IP51 |
Class of explosion resistance of explosion-proof transducer |
Exib¢òBT6 |
Transducer cable length (Cabling distance) |
10m¡¢20m¡¢30m....300m |
